Types Of Materials Used For Inflatable Boats

Inflatable boats are made from different types of materials. If this is your first time to purchase an inflatable and would like to know which the best tender is, here’s everything you need to know. Picking the right material for your inflatable boat is key to an enjoyable and secured ride on open water.

There are three types of materials that inflatable boats are made of. You will find inflatable boats made from Neoprene/CSM or referred to as “Hypalon”. The other material that inflatable boats Victoria supplier mentions is the PVC or polyvinyl chloride. The last type of material that you will normally find for commercial inflatable boats is the Polyurethane fabric. Let’s take a closer look at each material before making a final decision on your purchase.

Neoprene/CSM (Hypalon)

This is the most used type of material for the production of inflatable boats the Neoprene/CSM. CSM is usually made from rubber material “chlorosulfonated polyethylene. However, CSM alone can’t sustain needed air and must be combined with Neoprene to produce a functional inflatable boat. Neoprene has the capacity to hold air efficiently. The combination of CSM and Neoprene paved way to Hypalon.

The Pros

An inflatable boat made from a combination of CSM and Neoprene promises the following benefits:

  • Scratch-resistant than other materials used for inflatable boats.
  • High level of tolerance against harmful UV rays.
  • Lasting wear when compared to PVC.

The Cons

According to the expertise of inflatable boats Victoria supplier, the downsides of inflatable boats produced from CSM and Neoprene are:

  • Cost more than the models of inflatable boats sold in the market.
  • Prone to dirt accumulation because the CSM and Neoprene material can easily absorb dirt and allow it to penetrate.
  • The coating is prone to fading.

PVC (Polyvinyl Chloride)

Another popular option for the material is polyvinyl chloride or PVC. This material is made from synthetic plastic or polymer. For first time buyers, the PVC material can be either flexible or rigid.  A PVC inflatable boat may cost less, which is a good starter for anyone with a limited budget.

The Pros

PVC inflatable boats are widely preferred because of the following features:

  • Easy to maintain because you can simply use glue or replace worn PVC sheets with new ones.
  • When wet, the PVC inflatable boat is abrasion-resistant.
  • Any potential buyer can easily locate a supplier of affordable PVC inflatable boats.

The Cons

There are also reported drawbacks as mentioned by the representative of inflatable boats Victoria shop and here are some of them:

  • When dry, the PVC material is not abrasion resistant.
  • It has no UV protection when compared with other materials.
  • It has a higher risk of early deterioration because the PVC material is prone to becoming brittle over time.

Polyurethane

For many years the polyurethane is not a popular choice among manufacturers of inflatable boats. This material only gained recognition lately due to advanced technology applied in the production phase. An inflatable boat made from polyurethane fabric is expected to last longer than other materials because of its top performance against abuse and high impact.

The Pros

Polyurethane inflatable boat can offer the following features:

  • High level of abrasion resistance when compared with other fabric materials.
  • This type of fabric is puncture resistant.

The Cons

  • Pricier than CSM/Neoprene and PVC inflatable boats.
  • Difficult to repair, glue or weld when damaged.

Have you finally decided which material to choose for your inflatable boat? If you need assistance on brands of inflatable boats sold in Australia, why not give Lejen Marine a quick call. They are regarded as experts when it comes to finding a reliable boating partner. For more information, visit Lejen Marine today !

Leave a Reply