Timber Veneer Sydney: Everything You Need To Know About Timber Veneer

Do you have plans of using timber veneer? If you are clueless on the versatility of this special type of wood, perhaps this topic will shed further enlightenment and discover why it would make every home, office or any venue more aesthetically appealing to the eyes if infused with this element. So, get a comfy seat and dig into the shared information below from the timber veneer Sydney supplier.

What is Timber veneer?

According to the timber veneer Sydney customer representative, timber veneer is a piece of wood thinly sliced to produce a smooth finished wood product. The usual length when sliced thinly is approximately one-eighth inch and securely bonded onto a substrate material. A substrate material is referred as the layer of underlays and generally cheaper.

How is the timber veneer processed?

As mentioned by the timber veneer Sydney manufacturing expert the processing starts by slicing thin pieces from top quality timber or logs through the use of a powerful rotary lathe.  Here, pieces of logs are put in between two blocks and the rotary lathe will do its job in cutting it into thin slices of equal lengths. Afterward, the cut slices of timber are glued with underlay materials called “substrates”.

The different types of veneer substrate

There are three classifications of veneer based on application. Once the timber is cut from logs, it’s applied with the following materials quite similar to laminated board:

1. Paper-backed veneer

This type of veneer is bonded with paper backing. Paper-backed veneer is commonly used in matching curves, so that the veneer remains durable and not prone to cracking. You will normally see the paper-backed veneer in a vehicle’s interior parts like the dashboard.

2. Wood-on-Wood Veneer

This type of veneer is mostly glued to another piece of veneer. The one bonded below is generally the lower rated veneer because this portion isn’t visible to the onlooker. The Wood-on-Wood veneer is often used to enhance interiors.

3. Phenolic-Backed Veneer

This type of timber veneer is usually backed with the plastic substrate and has a decorative finish on the frontal surface. What’s good about the Phenolic-Backed veneer is its awesome feature of waterproof. Aside from that, cutting this type of veneer is a lot easier than other veneers because you can cut it with a knife. Other veneers recommend a special cutting tool like a table saw or hand router. You can use Phenolic-Backed Veneer with interior decorating projects.

4. What are the various timber veneer species?

Timber veneer originates from high-quality logs, cut thinly at same lengths. The common species of these special veneers include the following:

Do you need bulk orders of timber veneers from a reputable timber veneer Sydney supplier? If yes, you may visit the official website Forest Products and be amazed by their massive collection of top quality timber veneers and laminated board materials for your building and interior decorating projects.

 

Leave a Reply