How chemicals keep your pebble pool interior clean?

Pebble Crete has been used from many years for swimming pools. Chemical washing technique use for pebble pool interior maintenance called as pebble Tec or plaster pool to remove very thin layer stubborn stains and calcium deposits. However, to keep your pool healthy doesn’t require any chemical degree. There are few basic methods to know about chemicals used to maintain the longevity of the pool surface and keep the water clean and germs free.

Before knowing the chemicals, you need to keep the ideal level of pool water. If your pool is above or below the certain chlorine level or PH level, then that may affect the ecosystem of your pool on a daily basis. Here, what you need to maintain the perfect score of PH level chlorine level of your pool:

  1. Clean Regularly
  2. Maintain water levels
  3. Circulate the water
  4. Keep chemical balanced

pH level maintenance- To increase pH levels of any pebblecrete pool, use small doses of soda ash. Decrease pH levels with muriatic acid.

Chlorine Level – If chlorine level is low, use either liquid chlorine or non-stabilized granular chlorine to raise the chlorine level.

Total alkalinity – Alkalinity of any pool can be maintained by using sodium bicarbonate. But, to decrease the alkalinity you can use muriatic acid.

All above points are important to keep in mind especially after pool resurfacing has been done whether in interior or any exterior swimming pool.

If, your pool water has made you notice your pebble pool interior is lacking somewhere, then Amazing Pool Renovations can help clean with latest pebble technology.

Best Materials for Pool Resurfacing

Are you planning to have your pool resurfaced? If you have recently noticed signs of wear on your pool’s surfaces, this is the perfect timing to contact a pool renovation company. Why? These professionals are experts in various pool restorations like pool resurfacing. Aside from that, they know precisely the best resurfacing materials that will strengthen and improve the aesthetic appearance of your swimming pool. Below is a list of the commonly used and preferred pool resurfacing materials. So, take time acquainting yourself with each material and see if it fits your budget and personal taste.

  1. Plaster

This type of material is generally used for pool resurfacing projects, the plaster. Why? It’s relatively cheap as compared to other concrete pool resurfacing materials. However, plaster isn’t highly dependable when it comes to providing a durable pool surface. Plaster material is prone to chipping and require regular maintenance in the next few years after application.

  1. Pebble

Pebbles are becoming popular pool resurfacing materials because of their nature feel appearance. The use of pebbles for concrete pool resurfacing project can resemble the ambiance of a natural form of water like the lake or pond. Besides, investing in pebble as the main material for any pool resurfacing project is a wise investment because this particular pool resurfacing material is durable and expected to last longer than plaster.

  1. Concrete

In case you prefer to have a pool that can withstand wear and tear issues, then, opt for concrete as pool resurfacing material. This resurfacing material is widely used in public swimming pools. Aside from its easy application and quick dry feature, the concrete material can also be enhanced depending on a client’s preference in paint colours. Concrete is also easy to maintain and repair cracks by simply sanding or adding another application of the concrete mixture.

Pool resurfacing is a very complex job and should be done by pool professionals that are expert in this field. Careful selection of materials and correct method used are the essential ingredients of a successful concrete pool resurfacing project. If your goal is to have a pool that you, your loved ones and friends will enjoy for years, then, entrust this job with a pool restoration company that has a good reputation of delivering the best output.

Who to contact for pool resurfacing in Australia?

If you live in any state or suburb areas of Australia, feel free to visit the official website of Amazing Pool Renovations, a reputable pool renovation company with a solid track record of providing excellent advice on any type of pool restoration project. Call now and book a private consultation for your pool resurfacing requirement.

5 Benefits of Getting Concrete Pool Resurfacing

Concrete pools are among the most common types of pools in the world. Even the most advanced and fancy tiled or even stunning pebbled pools like Pebblecrete pools, are fundamentally based on concrete. So, having a strong concrete surface in your pool is a very important thing.

 

But as you might expect, over several years, the concrete begins to chip away and crack. This eventually lets the water seep in and damage the foundations of the pool itself. To avoid this, it is important to get concrete pool resurfacing services once every couple of years. Here are some key benefits of doing this:

 

5 Key Advantages from Concrete Pool Resurfacing

 

It Saves You Money

Pool resurfacing might seem like a needless expense to some. However, it will actually save you a fair bit of money in the longer run. Indeed, the resurfacing cost will more than offset the massive money you’d have to spend if the water seeped into the foundations of your pool structure.

Saves Time

Another great thing about pool crack repair through resurfacing is that it saves time. Otherwise, you would have to look over the entire pool and address each crack individually. Further, not all cracks are visible easily and so it is quite possible for you to miss out on some.

Enhancements

Getting your concrete pool resurfacing done is the perfect time to make some visual enhancements to your pool. This is the right time to research and find out what kind of pool additions would suit you. These will not only look great but will also enhance your home’s overall market value.

Increased Durability

Your pool can in certain cases get damaged by several factors. Any kind of natural disasters etc. can damage the pool irreparably. But with recently done swimming pool resurfacing, it has a better chance of staying consistent and not demanding any additional expenses.

 

Real Estate Value Increase

It is a well known fact that real estate value for homes with fancy pools is considerably higher. So, in the event that you would want to sell your home, you can expect a higher price for the pool.

 

Where can you get the Best Concrete Pool Resurfacing Services?

Looking for the most reliable concrete pool resurfacing services in town? Amazing Pool Renovations is the leading company for the job. With years of experience in the industry, we are one of the most trusted companies in the pool maintenance and repair market. Contact us now!

 

5 Signs You Need Swimming Pool Resurfacing Services

Pool resurfacing is an integral part of having a pool. It is important because if you don’t get it done, then your pool structure will deteriorate. Eventually, you will need to break it apart and build it anew.

 

Rather than taking on this huge expense, it is better to just get pool resurfacing services once every few years. But you also don’t want to throw money away. So, the best thing to do is to check for signs of cracking in your pool. Here are some tips to help you do that:

 

5 Tips for Checking Pools for Pool Crack Repair Needs

 

Erosion

Erosion is a natural process and is to be expected in any pool. The movement of water rubs the pool surface clean and this makes for a more difficult grip. If you see this on your pool, get experts to survey it now.

 

Permanent Stains

The majority of pool stains are caused by chemical interaction with the pool surface. This is an indication that you need a pool resurfacing job done. Get a reliable company that specialize in concrete pool resurfacing and pool crack repair to first do a survey and then suggest the right solution.

 

Rough Patches

 

Pools that need resurfacing often have rough patches on their surface. They are no easy to spot unless there is a visible colour contrast. If you happen to feel a rough patch under your feet, get professionals to look at it.

 

Tile Corrosion

 

Tiles are very resistant to regular weathering and erosion which impacts plain plaster pools. However, even these can and will eventually get corroded. In such cases, the tiles will pop out of place and let the p0ool water seep under. It is important to have the pool addressed by swimming pool resurfacing professionals immediately in such cases.

 

Disappearing Water

The last sign of a pool in need of pool renovations and resurfacing is unexplained water level dips. This implies that there is some kind of leak in your pool. It would be a good idea to get professionals and check out the pool before the gap expands.

 

Amazing Pool Renovations: The Leading Swimming Pool Resurfacing Experts in Australia!

 

Amazing Pool Renovations is one of the most trusted specialists of swimming pool resurfacing companies in Australia. We offer a wide range of pool renovation, remodelling, and enhancement services. Contact us now and let our experts give the best pool care to your property at the right price!

 

Common Pebblecrete Pool Issues and Solutions

Pebble pools are one of the more popular swimming pool surfaces being used nowadays, and for good reasons, too. For one, these pool surfaces stunning and beautiful, and certainly gives any pool a great and unique look. Second, these are durable and can last for many years before they start showing signs of wear and tear.

However, like many other pool surfaces, pebblecrete pool also require certain amount of servicing and repairs throughout their lifetime. When these maintenance requirements are ignored, several problems may start to appear.

Wear and Tear

The pebbles used for swimming pool surfaces rarely become worn out. However, the cement matrix where the pebbles are embedded into will eventually have to give in over time. This is usually caused by the cleaning solutions and other chemicals used to balance the pool water.

Although the pebbles themselves are smooth, the cement matrix where they are embedded are porous. That said, they can be negatively impacted by the chemicals in the water and the water itself. When this happens, it can cause cracks and crevices to appear on the surface. These cracks and crevices provide a perfect spot for algae growth, which eventually leads to staining and discolouration. When this problem is left unchecked, it can become difficult to completely and effectively remove the algae as their roots will have deeply penetrated the pool’s surface.

Dislodging and Erosion

Another issue with pebble pools is that some of them can sometimes lose its adhesion to the base layer. This can be caused by a variety of factors, including years (sometimes decades) of exposure to the water and chemicals. When this happens it can cause them to loosen and become dislodged or even erode. It can also cause the surface to become rough.

In any case, this will eventually happen as your swimming pool reaches a certain age. This problem doesn’t usually appear within several years after the installation, and can only be observed as the pool ages. To keep this from happening, it is a good idea to hire only reputable contractors when having your pool built or during pool resurfacing projects. This way, you can be sure of the quality of the workmanship and the materials used.

All in all, the chemicals used in balancing the pool water’s pH, acidity, and calcium levels are all important. They are necessary to ensure that the pool water is safe and suitable for use. However, these will have a negative effect on the pool’s surface, which includes that of pebble pools. That said, it is important to never use more than the required chemical dosage for your pool. This will help to preserve the integrity of the pebble pool’s surface so you can enjoy it for longer.

For more information, contact us at Amazing Pool Renovations today.

Fiberglass Pool Resurfacing Using Gelcoat

If you’re planning to resurface your fiberglass pool, then you’ve probably heard of gelcoats. These are the ones that are commonly used for fiberglass pool resurfacing. Different contractors may use a different material, but many contractors will be using this. Anyway, what are the benefits of gelcoats and are they worth the investment?

Long-lasting Surface

The technologies presently being used in the making of fibreglass surfaces for swimming pools have improved over the years. Now manufacturers are capable of creating a product that not only has a smooth and beautiful surface, but one that is strong and durable as well. Some manufacturers are so confident about their products that they even ever 25 years of warranty. This is so much better than other pool surfaces like vinyl or paint that offers little or no warranty.

Fibreglass surfaces of today are specially designed for any environment where a structurally sound and waterproof barrier is required. With fiberglass surfaces and coatings, you will have a pool that is not only beautiful but will also last for many years to come.

Enhanced Pool and Property Value

Having a swimming pool in your property can surely enhance its market value. But having a pool that is resurfaced with high quality fibreglass surface can improve it even further. For one, fiberglass surfaces can instantly improve the appearance of any swimming pool. It’s brilliant and smooth finish will definitely give your property’s aesthetic image a big boost.

In addition, fiberglass surfaces are easier to clean and maintain. This makes it even more appealing to many people who are interested in acquiring your property. Because it is much easier to clean, requires less chemicals and saves money on overall maintenance, it’s easy to see how fiberglass surfaces can provide an improvement in your property’s image and its value.

Cost-effective Option

As mentioned, fiberglass surface is easier to clean and maintain, making it a cost-effective option where pool surfaces are concerned. With fiberglass surface, you should see a noticeable decrease in cleaning labor, chemical usage, heat loss and algae build-up. Thus, you can save on pool cleaning costs, cleaning solutions, and pool water chemicals. True, fiberglass surface may be expensive initially, but you’ll definitely get the most for your money with it.

All in all, gelcoats are excellent materials to go with when it comes to pool resurfacing. They do not only look good, but they’re very durable as well. They’re also very cost-effective and can certainly help you save money in the long run. If you would like more information or need help with your pool resurfacing or pool crack repair projects, please don’t hesitate to get in touch with us. You can call us up at 02 9729 1108 or leave a message in our contact page.

Inground Pool Repair: Common Pool Pump Problems

The pool pump is an integral component of any inground pool. However, like many other parts of the pool, they will also start showing problems over time. There are many problems with regard to pool pumps and require the services of a pump or inground pool repair specialist, and below are the most common one.

Loud Screeching Noises

If you can hear loud, screeching noises coming from you swimming pool pump, then it is most probable that the problem is related to the bearings. More often than not, such noises is an indicator that the bearings are worn out. You can have this replaced by a pool technician. If you have the tools and have some skills with DIY projects, then you can probably do the repair yourself. However, many pool owners simply prefer to replace the motor with a new one, especially if it’s pretty old.

Loud Gargling Noises

Some pool owners are alarmed when they hear gargling noises coming from their pool pump motor. More often than not, it sounds as though there are rocks swirling inside the pump basket. There are several reasons why this happens.

For one, it may be because the pump is struggling to get water which is caused by having too many closed suction lines. Another reason is that the skimmers are clogged. If this is case, a simply cleaning will often make the problem go away.

Leaking Water

More often than not, leaks in pool pumps happen because of work or crack seals or O-rings. Needless to say, the only remedy to this problem would be to replace the said parts. Doing so will require that you dismantle the pool pump in order to remove and replace the damaged parts. If you’re pretty handy with tools, you can buy replacement parts and do the replacement or repair yourself. If not, you may want to consult a professional and ask them to do it for you.

Low Pool Pump Flow Rate

Low flow rate can be caused by blockages in certain components of the pool and the pool pump. For instance, if you’re experiencing a drop in your pump’s flow rate, you should take a look at your filter. This is where most blockages occur, and should actually be cleaned regularly to avoid blockages. You should also check your pump basket and impeller for any debris that may be blocking the water flow. Cleaning this can be a DIY project, though having the services of a pool technician can be of great help.

Pool pumps may require repairs and maintenance over time to ensure that they keep working properly. However, some pool pump problems may not be avoided, especially as your pump ages. When that happens, be sure to call in an expert to take a look at and solve the problem before it gets worse. If you need help with your inground pool repair or are looking for pool resurfacing services, please don’t hesitate to get in touch with us. You can call us up at 02 9729 1108 or leave a message in our contact page.

How Often Is Pool Resurfacing Needed For Your Sydney Pool?

You will need to utilize a pool resurfacing service on occasion when getting your Sydney pool to look its best. A resurfacing process ensures your pool will look its best while keeping cracks and other imperfections from being a hassle.

But how often will you need to get one of these swimming pool renovations Sydney homeowners will surely require? The timing will vary based on the type of pool you have to get fixed up.

Cement

A cement-based pool will need to be resurfaced every three to five years. The cement surface can crack apart and wear out from fatigue over time, thus making it critical for you to get your pool resurfaced accordingly.

Plaster

A plaster-based pool is similar to a cement pool, but it can still crack apart and wear out at times. You may also expect to resurface this kind of pool every three to five years. Some plaster pools can go for up to seven or eight years before you need to get one resurfaced to your needs.

Fiberglass

Fiberglass materials have become very popular when it comes to swimming pool renovations Sydney homeowners are planning. But even fiberglass has to be resurfaced on occasion. The good news is that the pool resurfacing process will not take place all that often in such a pool. You can expect to spend around fifteen to twenty years in between resurfacing events with such a pool. The timing may be shorter depending on the fatigue experienced within the area.

The pool resurfacing process can be a hassle for many, but the good news is that you don’t have to get it resurfaced far too often. You can also talk with the team at Amazing Pool Renovations if you need assistance with getting a resurfacing task up and running so it becomes easy to maintain and care for.