Key Points For the Sheet Metal Manufacturing Process to See

Any efforts for sheet metal manufacturing that take place must be utilized with extreme care. Several points have to be used in the manufacturing process to see that the sheet metal being used is of the best possible quality.

How Thick Is the Metal?

The metal should relatively thin although the specifics for how thin it should be vary. Sheet metal is typically found in sizes from 0.4 to 6 mm thick. These are thin enough to allow for the metal to be cut but still thick to where they will not bend on their own without the use of a proper die that would be incorporated in the manufacturing process.

What Form of Cutting Works?

The cutting process is critical for sheet metal manufacturing plans. Three forms of cutting are typically used:

  1. Shearing works to separate large pieces. The metal is cut on a straight line between two edges.
  2. Blanking cuts individual parts and focuses on smaller items. The goal is to separate one small piece of the metal from the rest of the stock.
  3. Punching occurs as holes are cut into the sheet metal.

Most cuts are done with laser materials. These ensure a smooth cut while also creating a proper shape that stands out and looks its best.

What About Bending?

Sheet metal materials can be bent just as well. A wiping die or a V-shaped die may be used in the process. Either option helps to produce an accurate shape that allows the sheet to fit in properly within a setup. The die may be configured by a computer to create a proper measurement for how many degrees the sheet metal is to be bent.

The sheet metal manufacturing process has to be engineered and prepared perfectly to ensure that different components can be secured. It must be checked appropriately and with care to see that anything being utilized at a given time will work properly.

Leave a comment