How To Install Timberwood Panels At Home?

Have you grown bored with home’s present interior? There are various ways to transform it to a fabulous look by use of timberwood panels. If this is your first time to DIY wood paneling, here’s a step-by-step guide.

Step #1 – Get accurate measurement

Accurate measurement is the key for a successful timberwood paneling installation project. Remember, top quality timber veneer panels aren’t cheap, so it’s important you get the correct measurement to avoid any timber from being wasted. Start taking the length and height of the wall to be covered with timberwood panels.

Step #2 – Condition the panels

Don’t be in a hurry to install the panels. According to the experts from timber veneer suppliers, it’s best to leave the panles to allow conditioning process to take place. Why? This is vital to prevent the timber from cracking, splitting or having unsightly marks. The suggested timeframe to condition the panels is approximately 48 hours for optimum result after installation.

Step #3 – Check for uneven surfaces

If you want to achieve perfection as you install timberwood panels on your walls, check for signs of uneven surfaces. In the event you found uneven surfaces on the drywall, do the necessary repair or replacement on sections needing filling to ensure stable foundation when you start paneling straight from the wall.

Step #4 – Install furring strips

For more solid backing, install furring strips, either vertical or horizontal depending on where your paneling will start. You can also use shims or wood shingles to ensure the strips level. Securely attach the strips with glue recommended for wood materials.

Step #5 – Be extra cautious with your initial panel

Be focused and patient as you start paneling. If possible lay the timberwood panels carefully to achieve the grain pattern you wish.

Step #6 – Cut with precision

Don’t just use any cutting tool. For timberwood materials a fine-toothed cutting saw is highly recommended. Avoid using coarse-tooth saw. In case you have table saw or hand cross saw, start cutting from the front of the timberwood panels. For circular saw, you can start cutting from the back of the panels.

Step #7 – Get professional help

In the event you don’t have any cutting or wood paneling experience for this first DIY project, better get professional help at Forest Products. They have a team of experts who can give you professional advice on what types of wood panels would look great for your home.

Are you now ready to start this wood paneling project? Just a recap of what you will need to ensure a successful outcome are the right materials like timber panels, get the correct size of nails including the other requirements of the timber supplier.

Starting this DIY wood paneling project takes time and requires a lot of patience. If in doubt on how to get started, let Forest Products sort everything you need from the raw materials down to the expert installers ready to install the timber panels with ease.

Leave a comment