Rigid inflatable boats or commonly termed as RIBs can be very costly. If you are a proud owner of a RIB proper care and maintenance are essential to ensure its top performance on open water. Remember, exposure to saltwater without showing some tender loving care on your RIB could cost you more on repairs or replacements. This is why the rigid inflatable boats Australia seller shares this quick guide for RIB owners.
How to clean your rigid inflatable boat (RIB)?
Do you often expose your RIB in seawater? If yes, proper cleaning is required after every boating expedition to preserve its pristine condition. According to the rigid inflatable boats Australia seller cleaning will only take a few minutes but will prolong the service life of your watercraft. Here’s how to get started with the cleaning routine:
- Rinse the outer surface of your RIB
Just like other types of inflatable boats, RIBs also need surface cleaning after pulling out of the water. If you neglect and simply tie your RIB after every seawater trip, dirt will accumulate over time and result in the formation of salt crystals on the surface coating. If this is your first time to clean the deck of a rigid inflatable boat (RIB), I recommend using a deck brush to remove deep-seated dirt. If unsure of the type of deck brush to buy, ask the assistance of the inflatable boat shops for suggestion. For example, if your Rib has wooden decks buy a deck brush with soft bristles. Remember, cleaning a rigid inflatable boat is entirely different from a conventional boat because this watercraft has inflatable siding. Special cleaning products are required to prevent damaging the boat.
- Avoid using these products
As mentioned, RIBS need to be cleaned using only the recommended tools and cleaning products. If your inflatable boat’s material is made from PVC or Hypalon, avoid using any of the following products:
- Harmful chemicals (acetone, bleaching agent, ammonia or any cleaner with high alkaline composition.
- Steel wool
The rigid inflatable boats Australia seller advices owners of RBS to use detergent to clean the dirt or debris on the surface and wash it thoroughly. Leaving traces of soap residue will lead to scum or mildew.
After giving your rigid inflatable boat a good wash, wipe traces of water and focus more on the dashboard, electrical components including handrails. Once the RIB is completely dried, cover it.
How to store correctly your RIB?
Rigid inflatable boats or RIBS need proper storing. The rigid inflatable boats Australia seller recommends this task as part of the care and maintenance. So, how to store correctly without damaging any of the vital parts of your RIB? Here’s a list for your reference:
Although RIBs can be deflated to save on storage, the boating experts suggest not deflating them for longer periods. Why? When deflated a rigid inflatable boat or RIB is more prone to creasing and deformation. Frequent bending can cause the RIB siding material to weaken.
If you won’t be using your RIB better cover it, especially if it is exposed under the sun. Long-term exposure to direct sunlight can cause early deterioration of your watercraft.
Yes, last of the best practices that can be applied for the care and maintenance of inflatable boats including RIBs is to store them dry. Neglecting your RIB and storing it with water spots can cause mildew and molds formation. I’m sure you don’t want to end up using an inflatable boat covered with molds.
The above ideas are intended to educate RIB owners about proper care and maintenance. Repairs can be truly costly on damaged RIBs. In the event you need repair assistance or want to know more about inflatable boats and RIBS listed for sale in Australia contact now a representative at Lejen Marine.