Care and Maintenance Tips for Furniture Made from Timber Veneer in Sydney

Timber veneer and veneer board used in furniture making are natural wood products. So like solid wood, they will require regular cleaning and maintenance. This will make sure that they last long and stay beautiful for many years.

Cleaning Veneer Furniture

In order to maintain the look and integrity of your veneer furniture, you’ll want to clean it regularly. Dusting should be done at least twice a week to prevent dirt buildup. When dusting, it is recommended that you use a soft, lint-free cloth or microfiber cloth. Using these types of cloth reduces any possibility of scratching or damaging the furniture surface.

Once a month, you’ll want to give your veneer furniture a more thorough cleaning. Here, you’ll need to wipe the furniture down using a soft cloth dampened with high quality wood furniture cleaner. You can buy such cleaners from most department stores and hardware stores.

When wiping the furniture, make sure that you wipe it along the direction of the wood grain. Afterwards, wipe the surface until it is completely dry. Make sure that all surfaces are thoroughly dried to prevent spotting or streaking cause by dried-up water.

Maintenance for Veneer Furniture

Some manufacturers recommend that you apply a good quality furniture polish to your veneer furniture at least twice a year. Like cleaners, you can buy furniture polish from department stores or hardware stores. You can also go online and search for the said product there.

Before using any furniture polish, you should try it out first on a small, inconspicuous area of the furniture. This way, you can see if there will be any adverse reactions between the furniture and the polish. For instance, if you have a veneer table, try the polish first on one of the legs of the table (preferably in the lowest possible portion) and see what happens.

More Tips

Here are some more tips and practices you can employ when cleaning and maintaining your veneer furniture.

  • Wipe spills immediately to keep them from staining the veneer board
  • Lift objects instead of dragging them across the veneer’s surface.
  • Use protective pads underneath items with a rough bottom like pottery, office printers, and others.
  • Keep veneer furniture away from direct sunlight as this will cause the colour to fade.
  • Use coasters, placements or table runners to protect the veneer’s surface from hot or wet items like coffee mugs, potted plants, etc.

If you are looking for high-quality veneer board or timber veneer in Sydney, please don’t hesitate to get in touch. You can call us up at (02) 9771 5155 or leave a message in our contact page.

Ideas To Consider For Your Under Desk Power Needs

Having an under desk power unit for keeping your power sources easy to manage while at your desk is always worth looking at. But you must also look at what you are doing when getting one of these office power solutions to work for you.

How Many Plugs?

Look at the number of plugs that may be utilized within your layout. You can choose to get a power setup that utilizes multiple plugs at a time, but you should see that you don’t have too many. You only need the appropriate number that you require based on what you plan on using at your desk. This is to provide you with extra help for getting your items powered up well.

Look For USB Ports

You can find USB ports in your under desk power unit. Such ports are designed for powering up tablets, phones, and anything else that can be powered at your desk. Having two of these ports is good enough for helping you get extra energy for your devices.

Can You Fold It?

Some under desk units can be folded around from a base. You can get one of these office power solutions to fold outward from under the desk and reveal it for cases where you want to share power with others or you need to extend the unit’s range. This would work best if the power source for that under desk unit is stationary and will not be impacted as you pull the ports and plugs out from underneath. You would have to be cautious when getting these items out for your use though.

Be aware of how well your under desk power layout is managed so you can have a power unit that fits in perfectly with your needs for getting more done at your desk. Talk with DPG Form Fittings if you have any added questions surrounding how such fittings can work for you.

 

Other articles from DPG-FormFittings

Why You Should Use Wood Paneling for Your Home

Wood paneling lends a warm, rich and sophisticated look to any home’s interiors. This is why many residential and commercial property owners prefer this type of wall treatment for their properties. Whether the wood panels are stretched all the way to the ceiling or to a midway level, they are sure to make a solid statement for any property’s interiors.

One factor that makes wood panels a thing of beauty are the natural designs found in the wood itself. To be more specific, the natural colour of the wood and wood grains combine to create this a lovely look.

Another thing that people love above using wood paneling is that they are easier to restore or replace if the need arises. It can be sanded down and resealed to bring it back to its former glory. Property owners can even have the colour changed by adding a different stain if they prefer to do so.

But aside from beauty and ease of maintenance, a more important concern for property owners is the return that they get for this particular investment. Wood panels, when cared for properly, will easily last for several decades before needing repairs or replacement. Routine maintenance like filling holes, staining, and other will be necessary to ensure the longevity of the wood paneling. And although this may require money upfront, you can be sure that this is one investment worth making.

As can be seen from the paragraphs above, wood paneling provides a host of benefits for your home’s interiors. Unfortunately, solid wood panels cost a lot of money, which is why some people avoid using such material.

However, there is a way for you to achieve that warm and welcoming look of wood panels without having to break your bank account. Instead of using solid wood, you can use timber veneers for your interior walls. Timber veneers are made using real hardwood trees. Thus, they come in decorative wood finishes that showcase the natural beauty of hardwood.

If you are looking for high quality timber veneer and veneer board to use as wood paneling for your home’s interiors, please don’t hesitate to get in touch with us. You can call us up at (02) 9771 5155 or leave a message in our contact page. As one of the leading timber veneer suppliers in Sydney, we have a wide range of timber veneer products including Australian White Birch, Brazilian Mahogany, Red Cedar and more.

Signs It’s Time for Pool Renovations in Sutherland Shire

Walking around your swimming pool, you may have noticed that it’s looking a little bit worse for wear this year. But maybe you’re worried about the costs, or you still need some more reasons before calling the pool renovation contractor. If you are, here are some tell-tale signs that you need you should consider swimming pool renovations in Sutherland Shire.

Visible Deteriorations around Your Pool

Obvious signs of deterioration and decay around your pool means that you should consider swimming pool renovations in Sutherland Shire. Such signs include cracked tiles, discolored tiles or stained areas, and appearance or rust near pipelines and plumbing. The sooner you catch these problems, the sooner you can deal with them and keep them from damaging your pool. However, when these damages are too extensive, then a swimming pool renovation is the only option to go for.

Safety Concerns and Hazards

A damaged swimming pool can also be a cause for safety concerns and hazards. There are various problems with a swimming pool which can cause potential accidents and untoward incidents. These include faulty electrical design in the heaters or pool lighting.  Broken and loose tiles are also a major cause of concern. All these can render your pool unfit and unsafe for use, and thus requires pool renovations in Sutherland Shire before anyone of your family and friends get hurt.

Old and Inefficient Pool Equipment

Pool equipment and technology has improved significantly over the recent years. If you feel that your pool equipment and technology isn’t as efficient as it was before, then you should certainly consider undergoing pool renovations in Sutherland Shire.

There are many new pool equipment and technologies available for both residential and commercial swimming pools. For instance, you can opt to have electrical components that make use of less power or electricity. You can also have automated cleaners installed in your swimming pool to make it easier and more convenient to maintain.

If you’re looking for a contractor who can help you with swimming pool resurfacing and pool renovations in Sutherland shire, do get in touch with us. Call us up at 02 9729 1108 or leave a message in our contact page and we’ll gladly help you with the process.

How Can the Base Work When Getting Retail Display Stands Ready?

The features on a banner that you put out on your retail display setup can be attractive and illustrate everything you have to offer. But you must also look at how well one of these retail display stands is anchored.

The base on the bottom of one of your banner stands should be reviewed to see that it has a secure design that will keep your display intact. The base should ensure that the banner will not slip or tilt over while you are trying to display it.

What Types of Legs Work?

The base on your retail display stand can include a series of legs that keep your setup intact. The legs might include things like small feet that stick out from the base by a few inches. These add enough room to allow the surface to stay intact, but this works even better when those feet are weighted.

The legs should support the weight of the frame that your stand will go on. Keeping them identical in size is critical to their success.

A Wider Base May Work

Sometimes you might need to get a much wider base set up on your stand. This would entail a large metal bar on each side of the stand. The bar would create an even amount of support over the entire body of the stand. This is useful for banner stands that are more vulnerable to wind gusts.

Review the Weight

The weight of a base should be heavy enough to where the stand will not be at risk of shifting around. But at the same time, the base should also be easy to move around if you grab it from its sides. The key is to keep your stand in the same place based on your preference.

Look at how well your retail display stands are supported with a proper base on each one. Swift Display can help you with finding an appropriate display choice that fits your display demands well.

Environmental Benefits of Using Timber Veneer

Timber veneer is a popular alternative for those who want to have the look and appeal of solid wood in their homes without spending much on solid wood boards. But aside from being affordable, there are many other benefits to using veneer. For instance, the use of timber veneer is considered to be more environment-friendly than using solid wood boards.

Timber veneer is a thin slice of wood that is glued to a solid base, usually plywood or high-density plasterboard. This process of manufacturing veneer actually provides an efficient way of using trees.

Consider this: in order to create solid wood panels, logs are sawn into boards of varying thickness. Depending on the size of the saw, the sawblade going through the log generates a substantial amount of sawdust. In the case of veneers, the log is ‘sliced’ into thin sheets. This greatly reduces the amount of sawdust, and consequently waste products, created in the process.

Because timber veneer sheets are thinner than solid wood boards, you can create more veneer sheets than solid wood boards from the same tree or log. In fact, you can create over ten sheets of veneer from one piece of solid wood. This way, veneer manufacturers are able to extend the use of a piece of wood while generating minimal waste materials.

Solid wood boards are taken from all kinds of hardwood trees like oak, mahogany, walnut, maple and many others. Most of these trees are slow-growing, meaning that they can take several decades before they mature. Also, some of these trees only grow in selected areas around the world. When these trees are cut down, they can be pretty difficult to replace. The inability to inefficiently replace cut down trees puts a strain on wood resources.

On the other hand, timber veneer manufacturers are able to create significantly more sheets from one tree or wood. This means that there is lesser need to cut and harvest trees in order to create veneer sheets. By cutting down less trees, not only will we be able to save our trees, but we’ll also be able to allow our forests to replenish itself.

Here are Processed Forest Products, we strongly believe in the efficient and sustainable use of trees and our forests. This is why we make sure that the veneers used in our manufacturing processes are sourced only from reputable veneer merchants working with sustainably managed forests or plantations.

If you are looking for high-quality timber veneers, please don’t hesitate to get in touch. You can call us up at (02) 9771 5155 or leave a message in our contact page. We also have a range of other products including fire rated boards, doors, Compac laminates and more.

 

Articles from Forest Products:

 

Softwiring Overview

Softwiring or commonly referred as the “plug and play” is a type of electrical wiring method that licensed electrician prefer due to its easy installation approach. If you are planning to redo the entire wiring system of your home, office or commercial space, here are a few things you need to know about Softwiring.

Introduction to Softwiring

Softwiring is the simplest type of electrical wiring that allows electricians to work on cables underneath flooring or in the ceiling. This method of electrical wiring installation is less time consuming, safe and permits rewiring for future expansion.

Benefits of Softwiring

  • Can be installed and reconfigured quickly than other methods
  • No need to disassemble existing wiring system
  • Safer in every sense because this type of wiring system has the capacity to match heavy usage without resulting to break down.
  • Every used component are re-useable
  • Flexible because it allows the cables and sockets to snap together, ensuring a secured fit-out.
  • Even a complex installation can be done in a straightforward manner due to minimal parts used.

How is the installation process?

Softwiring installation process promises faster turnaround because the licensed electrician will only focused on installing starter sockets. Then, start plugging at one end of the interconnecting lead to the starter socket. The other end plugs are plugged to the GPO socket, then, to the second interconnecting lead into the other socket on the GPO. This process saves electricians time because they can pull ordinary cables through workstations including hard wire.

Are there concerns on Softwiring?

Since the Softwiring is a very straightforward “plug and play” installation, the Electrical Trade Union (ETC) has shown greater concern on how people view it as something that doesn’t require the installation of an expert electrician. Even though this type of electrical wiring installation is less complicated the bottom line is you should be completely aware of existing law mandated in your state that requires the installation to be done by a licensed electrician. For example, in the Victoria States under the law, the completion of softwiring in a facility must be fully signed by an electrician to ensure it complies with safety standards. So, inquire with your local authority the law governing on softwiring and conference box installation to avoid violations and delays on your electrical wiring installation project.

Who to contact if in need of softwiring installation?

If you are situated in Australia and have plans to upgrade your office old electrical wiring system to modular wiring (softwiring), go and visit the official website of dpg-formfittings and let their experts guide in as you choose from a variety of softwiring solutions that will match your workstations need.

 

More articles from dpg-formfittings:

 

Pull Up Banners Can Use X-Frame Supports

One of the options you have to use when finding pull up banners on your exhibition stand entails the use of an X-frame. This design works like a tripod and can be set up in seconds. The layout is useful for when you have posters for exhibition stands that you want to pull up and display as flat as possible.

How the Frame Works

An X-frame can be useful when highlighting a sign for your promotion. The frame is designed with a large metal frame similar to what you might find on the back of a picture frame. One post goes back by a few feet while two other posts stand out in front to support your banner.

The X-frame design uses four anchors. Each anchor can be found on the corner of your frame. You will use a series of small fasteners or latches to stretch out one of your pull up banners. The frame keeps the banner flat and easy to read and display anywhere.

Review the Size

You must look at how the X-frame design is organized when getting your pull up banners displayed right. The frame can be a few feet in height. The frame should be sized as closely to the bodies of your banners if possible. Although you can secure an oversized banner onto a frame, you would have to secure the fabric over the ends, which could hurt the banner. Therefore, sticking with a frame of a simple size should be good enough.

Can You Adjust the Frame?

You might have the ability to adjust the layout of the X-frame to allow certain points to stretch out further. You must look at how well the banner will secure itself onto the corners in such a case. The frame can be positioned up and down if needed depending on what you prefer to utilize.

Watch for how an X-frame layout can work when getting your banners for exhibition stands ready. Ask Swift Display for help with finding one of these frames for your next big promotion.

Storage Solutions: Are Aluminum Cabinets Better than Steel Cabinets?

Many people nowadays are talking about using aluminum cabinets instead of steel cabinets. They tend to think that aluminum is a much better choice because of its sleek appearance. It may not be as strong as steel, but it can hold its own. Although aluminum has its own merits when it comes to cabinetry, it is not always the perfect storage solutions.

All in all, the answer to which between aluminum and steel cabinets is better will depend on how you intend to use them and where they will be installed. Aluminum would be a good choice for residential kitchens because of their sleek look and finish. They also hold well against moisture and other potentially damaging things found in most kitchens. Thus, if you are looking for good storage solutions for your home, then aluminum is worth considering.

On the other hand, if you are looking for strong and durable cabinets for your warehouse or industrial facility, then steel cabinets are definitely the way to go. This is especially true if you have them manufactured by reputable manufacturing companies.

To ensure the quality of all steel cabinets and metal storage solutions, manufacturers only use high quality raw steel materials. Different companies will source their materials from different suppliers. Nonetheless, if you choose a trusted company to manufacture your steel cabinets, you can be sure of the materials’ quality. There are other things that these manufacturers do in order to further improve the strength and durability of their products. For instance, they apply powder coating to protect the steel cabinets from the damaging effects of rust and corrosion.

Some say that aluminum cabinets simply look better than steel cabinets. In some cases, this may be true, but it isn’t always the case. Many manufacturers nowadays make use of the latest technologies in manufacturing cabinets and other storage solutions like shelving units. For instance, many manufacturers use laser cutting technology to eliminate rough edges and create a smooth appearance for their products.

Also, using the same technology allows them the cut steel in precise and varied shapes and sizes. This means that you can have your cabinets and metal storage solutions customised according to your personal design tastes.

In sum, if you’re looking for metal kitchen storage solutions, they you may consider using aluminum cabinets. However, if you’re looking for warehousing and industrial storage solutions, then there is no better material than heavy duty steel. And in case you’re looking for a manufacturer with laser cutting capabilities to help you in the design and fabrication of your metal cabinets or other metal storage solutions, please don’t hesitate to get in touch with us. You can call us up at 04 8111 5752 or 04 0166 3022. You can also click here to get a free quote.

How Are Pebble Pool Interiors Produced?

People around the western suburbs of Sydney often look for anything they can find when getting their pools to look their best. Pebble pool interiors are among the more intriguing installations that people often utilize. These interiors provide people with special surfaces that go on the bottom parts of their pools. The surface must be planned accordingly for it to look appropriate.

How Is It Prepared?

These pool renovations western suburbs homeowners are interested in are produced through a series of steps:

  1. Some pebbles or stone materials are produced at the start. These can be artificially prepared with polymers and ceramic materials. They must be planned with a diverse array of colors and sizes. Some natural pebbles can work, although you might have a mix of natural and artificial stones in your surface.
  2. The interior of the pool must be smoothed out and flattened. The inside must be deep enough to fit the demands you have.
  3. After the inside is prepared, you can add the pebbles to the bottom. A cement surface or other adhesive must be applied along the surface.
  4. The pebbles are then applied evenly along the surface. These pebbles are spread as evenly as possible. Some filler grout materials may be added in between pebbles if needed.

What Makes a Pebble Interior Great?

Pebble pool interiors are special for many reasons:

  • The pebbles create a natural appearance along your pool.
  • Each of the pebbles feature waterproof materials that will not weaken or come apart over time.
  • The diverse array of pebbles along the inside creates a distinct surface that is more appealing than what you’d get out of traditional tiles.
  • Pebble pool interiors can be found in many colours and patterns as well. You can find pebbles with green, blue or white tones among many others.

Take a look at what a pebble interior can do when finding pool renovations western suburbs residents will be interested in. Contact Amazing Pool Renovations to see what you can get out of your surface.