Category: Lejen Marine

Rigid Inflatable Boats Can Hold Engines Well

One point about rigid inflatable boats that many people around Australia forget about involves how they can hold durable engines. You must look at how well your boat can hold onto an engine so it can propel your boat without hurting the rest of your boat’s body. An engine helps you get along the water, but you have to watch for what goes into such a unit.

Where Is It Placed?

Many inflatable boats NSW sailors use often come with spots on their back areas where engines can fit. The back part should have an open space for an engine while having room for anchors to keep it here. The spot for the engine should be apart from inflation chambers too, thus keeping the boat from deflating even as the engine is in full power.

How Much Power?

Rigid inflatable boats are designed to handle strong engines. Many of these boats can support models up to 10 horsepower in size. This is enough to keep a boat moving without being overkill. The power of the engine should be measured by the size of the boat. You must have a power unit that fits well enough to keep the boat moving without being impossible to control.

How Fast Can It Go?

Brig, Zodiac and Highfield boats are all made with powerful bodies that can handle the open waters of Australia. With an appropriate engine, one of these boats can go up to 20 miles per hour. This is fast enough to keep a boat moving without worrying about the inflation chambers bursting.

A great engine works perfectly with a RIB that features tubes 18 inches or greater in size. Such a RIB will remain stable and can support the power produced by the engine.

Look at rigid inflatable boats are made to support powerful engines that are easy to add to a surface. Contact us at Lejen Marine to learn more about what can be used on one of these boats.

An Inflatable Kayak Can Come With a Cargo Net

As fun as it can be to sail along the waters of Australia in an inflatable kayak, you must look at how well you can store the cargo you wish to transport. You have to see how the cargo net in your kayak is laid out.

Where Does It Go?

A cargo net on your kayak should be placed along the front part of your vessel if possible. Many inflatable tenders Australia kayakers use nets on the front parts of their bodies. A front net is ideal for giving you clear and quick access to the items you need to carry with you. This is also to help you see that your cargo is secured properly and that you can take action in the event it tries to slip out.

How About a Fastener?

Fastening ties and hooks may be used on one of these nets on your inflatable kayak. A fastener can come with a solid body that keeps the net down and tight even when items are inside of it. This keeps you from worrying about things slipping out.

What About the Density?

An important part of finding rigid inflatable boats Australia should review entails how dense the net is. The surface should have enough openings to allow air to move through and to help you identify what is inside the space. But the net should still be dense enough so stuff will not slip out while you are moving around.

How Much Space?

The amount of space that your net can handle can vary. Many rigid inflatable boats Australia enthusiasts use could handle several cubic inches of space for oars, ropes, inflating materials and so forth. Look at how well the net can handle everything you have in your kayak.

Watch how the netting on your inflatable kayak works so you will keep your cargo from escaping. Look at what we at Lejen Marine have to offer when finding a quality kayak that is easy to follow.

Keys For a Kit For Snap Davits Australia Boaters Need For Highfield Models

Using Highfield inflatable boats can be fun, but they can also be tough to secure onto larger boats. But with snap davits Australia boaters will have an easier time with securing their vessels. A proper kit is needed to get the right snap davit prepared on any larger boat so it can handle inflatable models. You must have the correct parts in your snap davit kit for it to work.

Get the Right Heads

Highfield RIB vessels can be supported through proper snap davit heads. A davit head should be about 100mm in size. This extended length is good enough for creating a sturdy spot that is not hard to use.

What Do the Pads Do?

Pads have to be added to a davit head. Highfield inflatable boats are designed to fit onto davits that feature fastening pads where the anchors on the boat are easy to secure. The pads should fasten onto the davit heads well to create a stronger layout.

Pads may also work as covers for the davit heads. This might be for cases where the davits do not have to be used. Watch how well you can secure and protect them while using a boat like this.

Enough Bolts Are Required

Look at how the bolts and fasteners for snap davits Australia kits work. A setup would include a series of small nail-like surfaces that affix themselves onto a boat. Additional bolts are needed for keeping those nail materials in their place. Considering how many inflatable boats Australia sailing enthusiasts use are heavy, it is vital that the bolts and fasteners keep the davits intact without being pulled apart.

Check a Release Base

A release base may also be added to a kit. This uses a lever that triggers when the davit releases a material.

All people should look at snap davits Australia boats can use. Any kit for getting these added onto a Highfield RIB vessel or any other boat should feature the right pieces. Check with Lejen Marine to see how well great snap davits may be added in any spot.

Large Decks Are Needed For Inflatable Boats Sydney While Fishing

It is important to see how an inflatable boat is organized when getting out around the Sydney waters during a fishing trip. The deck should be large enough on one of these inflatable boats Sydney residents can trust and rely on.

How Long Should the Deck Be?

A deck for a fishing boat needs to be at least eight feet in length if possible. This offers enough room inside a boat to let you move around and store all your fishing equipment.

How Many Seats?

The number of seats you can get in a Swift Marine inflatable boat or another model should be analyzed based on your needs. You might require one or two seats at a time. This is based mainly on how many people will be in the boat or how much equipment you have. Whatever the case may be, the seats should be wide enough to where two people could be supported. This is enough to create a wide space for one of these rigid inflatable boats to stay on the water and not be as likely to topple.

The seats inside one of these boats should extend well over the width of the vessel to create a comfortable surface. It must also be even in weight to keep the boat from favoring one side.

Check the Borders

The borders around a deck must be analyzed well to keep a comfortable space ready. The borders can be around one or two feet wide on one of these rigid inflatable boats. This is strong enough to create a barrier that can handle the deck.

Don’t Forget the Support

Look at how well the floorboard for support on an inflatable boat deck is organized too. Swift Marine boats are often made with a slight aluminum or fiberglass support to create a consistent shape for the rest of the boat. This includes something that can support a larger floor space. Anything that is flexible enough to be rolled up always helps.

It is a necessity to look at the decks for inflatable boats Sydney fishing enthusiasts might be interested in finding. We at Lejen Marine have additional details on boats to look into. Contact us at Lejen Marine for help with finding an inflatable boat you can trust.

How Many Chambers Work For An Inflatable Kayak?

It is vital for you to get enough air produced when getting an inflatable kayak ready. But the air must also go through all of the chambers of such a boat with ease.

A typical kayak will need three chambers for air. These are for the following:

  1. A chamber works for the floor of the kayak. This is the main surface that you will be on top of.
  2. The port chamber helps you fill up air on the left end of the kayak.
  3. The starboard chamber is for the right end.

These chambers allow for enough air to move into one of these inflatable boats Australia. These are particularly divided up because of the immense size of one of these kayaks. Having these three chambers makes it easier for you to produce a good amount of air inside the boat. This in turn creates an even surface that you will easily get more out of when you are rowing out on the water.

But you should also see how well the air can be taken care of. There are a few sensible standards worth looking into:

  • The number of air valves for your inflatable kayak should be reviewed well. You might need around five of these to make it easier for your kayak to stay inflated. These include many valves for multiple chambers.
  • The amount of time needed to inflate your kayak is important to see. You might need to spend five to eight minutes to get it all inflated.
  • The amount of pressure needed during the inflation process should be checked too. You might need 1.1 psi of pressure in some cases.

Watch for how well you can get your inflatable kayak ready for sail. The process for inflating your kayak should be simple thanks to the sensible setup used for making it easier for you to get your kayak managed right. Lejen Marine can help you get a good kayak for any desire.

Inflatable Buoys Often Come With PVC Materials

PVC is a popular material that can be found in many buoys that inflatable boats Australia may move around. This is especially the case with inflatable models. In fact, many of these buoys are made out of the same PVC materials that larger inflatable boats around Australia are made with. People who need quality inflatable buoys should see how well this compound can work. These include quality buoys you can find from Lejen Marine.

What Is PVC?

PVC is polyvinyl chloride, a plastic polymer. It is made with a mix of carbon, hydrogen and chlorine. As the polymers combine, they produce a sturdy unit that sticks together.

Easy to Shape

A buoy can be made with a height of 1800mm or greater. In fact, it does not take much time for a buoy to be shaped when it is made with PVC. This compound is easily moldable and can be produced in many sizes depending on the needs you hold for it.

Light in Weight

PVC is also a lightweight material for inflatable buoys. It is not difficult for a person to carry the buoy around when getting it ready for training or sailing purposes. Even after it is inflated, the PVC material will not bog anyone down.

Thick and Strong

Even as it is light in weight, the PVC fibers used in a buoy are designed to be thick. Such fibers can pair up with others at a time to make it easier for a surface to be prepared well. As this works, it becomes easier for a buoy to be designed properly. The fibers will allow the buoy to stay upright and not topple over while in the water.

Floats Very Well

PVC can also float very well. The thick and solid layers ensure that water will not sink into the buoy, thus allowing it to stay afloat.

Look at how well PVC can be used when you are getting a quality buoy set up. This surface is valuable for buoys just as it is for inflatable boats Australia. Contact Lejen Marine to see how well such buoys can work.

Snap Davits Keep Inflatable Boats Secured on Larger Boats

There are often times when an inflatable boat has to be secured in a suitable fashion. This is where snap davits can be used. People looking for snap davits in Australia should see how well these materials can be used when securing any kind of boat. Looking for such items for your boat from Lejen Marine can help you with getting out on the water quickly.

How Does This Work?

A snap davit works for inflatable boats with a simple layout. It works by linking itself to the back end of a larger boat. It will take in an inflatable vessel and produce a secure locking system to keep the boat safe. This allows the boat to stay fully attached to the back end of the larger boat.

The unit then takes the boat and lifts it upward. This allows the small boat to be kept out of the water while it is being towed around. This keeps the boat safe and easy to use.

The hooks that help with towing the boat are easy to add. They can be snapped onto the base in just a few moments.

How Much Weight?

Snap davits are great for how they can handle even the heaviest inflatable boats. They can work with up to 100 kg of weight at a time. This should be enough for larger units although the capability of a boat to tow something can vary based on its size and motor plus the width of the boat towing the smaller inflatable unit.

How Is It Installed?

The process of installing a snap davit is very easy to follow. The unit can be mounted onto the back part of a boat with ease. A few bolts should keep it flat on a good surface.

The anchor part should be fully mobile. It can come with a small lever or handle for allowing it to be adjusted as needed too. This adds a comfortable and useful layout that is not hard to use in any case.

Great snap davits are important for all boat owners in Australia to see. Such features make it easier for people to keep their inflatable boats secure and towed well. It does not take much for one of these items to work either. Find one of these from Lejen Marine and you will see just how well it can work for your boating needs.

How to Prevent Mold Growth on Rigid Inflatable Boats

One of the most common problems amongst owners of rigid inflatable boats is mold and mildew. When they take their boats out after a long time in storage, they usually them infested with these fungi.

What’s the Best Way to Deal with Mold and Mildew?

The good thing is that mold and mildew is relatively easy to clean off of boats. There are commercial and home-made cleaning solutions available for such purpose. You can usually get them from shops that sell inflatable boats and inflatable buoys.

However, the best way to deal with mold and mildew is to keep them from developing in the first place. This can be achieved by cleaning rigid inflatable boats prior to storage. It may seem like a lot of work, especially if you’re tired from a long day of boat ride. But this little proactive measure can save you from a lot of hard work in the future.

How Do Mold and Mildew Develop?

Rigid inflatable boats are prone to developing mold and mildew. Mold usually develops from food and other organic matter in the inflatable boat. On the other hand, mildew is the result of high moisture content in the fabric components of the inflatable boat. Both fungi though develops and thrives in dark and damp environments.

Preventing Mold and Mildew Growth

To keep mold and mildew from wreaking havoc to your rigid inflatable boats, the following practices should be observed.

First, be sure that you clean your inflatable boat thoroughly after using it. By doing so, you are eliminating any matter or materials where mold can grow and develop. There are a variety of cleaning agents and methods which you can employ. If you need help in choosing with products and techniques to use, talk to one of the experts working in a marine shop that sells rigid inflatable boats. Consider applying some fabric protector as well which you can get from the same shop.

Second, be sure to dry the boat completely after cleaning. It is recommended that you air dry rigid inflatable boats before storing them away. Also, choose a storage space

Inflatable Boats in Sydney: Dealing with Mold on Your Inflatable Boat

It can be really frustrating to see mold on your inflatable boat after you’ve employed all preventive measures available. It is quite unfortunate, but yes, all inflatable boats in Sydney experience mold infestation every now and then. When this happens, you’ll want to do complete and thorough cleaning of your inflatable boat to prevent them from spreading. With regard to cleaning, you can either use commercial cleaning products or natural cleaning solutions.

Searching for and Buying Mold Cleaning Solutions

There are many different variants of both commercial and natural mold removal solutions. Some of them contain bleach, while there are others that do not. You can search for these items online, which can be pretty convenient. However, you may want to consider visiting a marine supplies store or stores that sell inflatable boats in Sydney like Highfield RIB and others and get your cleaning product from them.

Getting Cleaning Products from Marine Shops

Going to a marine shop is often the better option because it allows you to talk to knowledgeable professionals. Given their experience and expertise, they can provide you with the right information about which cleaning products to buy. They can even show you how to properly use these products so you can get the most out of them. So do visit a shop that sells inflatable boats in Sydney, preferably the same shop where you bought your boat.

Making Your Own Mold Cleaning Solution

There are also some boat owners who prefer to make their own mold cleaning solutions instead of buying them. There are many resources like boating magazines and websites that teaches how to do this. Most of the ingredients in these man-made cleaning agents can be found at home like household bleach or laundry detergent. You don’t have to run to the marine shop that sells inflatable boats in Sydney to get them.

A word of caution though should you plan to go with this DIY route. Not all of these man-made cleaning solutions are effective in removing mold from your inflatable boat. Some may work while others may not. In fact, some may even cause damage to your boat and ruin the fabric. This is why it is still best to head to a marine shop that sells inflatable boats in Sydney. Talking to their experts will ensure that the mold is completely removed and without causing damage to your boat.

Advantages of Inflatable SUPs

There have been many arguments about inflatable SUPs and hardboards. If you are contemplating of buying an SUP, you probably have heard or read most of them. Still, there are many reasons why an inflatable SUP may be the better option to go for.

Compact and Convenient. Inflatable SUPs are very convenient to lug around and transport. When deflated, they can fit in the trunk of any car, be boarded on planes or even in a small boat. They often come with their own carry bags which you can carry on your back while you ride your bike. Their relatively compact nature also makes them easy to store in a closet or under the bed.

Lightweight. Inflatable SUPs don’t weigh much and can be carried around easily. Even a child could carry one using the carry bag that comes with it. Still, it should be noted that inflatable SUPs come in different sizes and construction. This causes the actual weight to vary from one SUP to another.

Sturdy and Rigid. Many people usually think inflatable SUPs are weak and soft. However, when inflated to their maximum PSI level, they can be just as rigid as any other SUPs. Even so, they still maintain a level of cushiony feel. This makes them more forgiving if you fall and hit the board. Also, the padding gives an additional grip and helps to make standing or kneeling on the SUP more comfortable.

Durable. Inflatable SUPs in Australia are made from the highest quality of materials available. That is if you buy them from reputable manufacturers and suppliers. In many cases, they should be able to withstand wear and tear better than other SUPs under normal conditions. Still, this does not mean that they are invincible. Sharp objects like nails and jutting rocks will still cause tears and leaks if you’re not careful around them.

Versatile. Anyone will certainly have a grand time with inflatable SUPs. Regardless of your age, with the proper training, you will have no trouble manipulating an SUP. Most inflatable SUPs can be used for recreational purposes. There are also inflatable SUPs that can be used for racing and fast touring.

Inflatable SUPs are excellent options and can provide hours of enjoyment in the water. However, you need to make sure that you are getting one from a reputable manufacturer or supplier. This way, you can be sure of the quality of the SUP you intend to buy.

If you are looking for high quality inflatable SUPs in Australia, do get in touch with us. You can call us up at 02) 9979 4533 or send us an email.