December, 2017 | Content Optimization

Frequently Asked Questions When Buying A Bidet

Do you still have unanswered issues about buying a bidet? If you are on the process of doing research about modern toilets, reading below frequently asked questions could shed further enlightenment to your troubled mind and direct you to a wise decision afterwards.

Question #1 – Why buy a bidet?

The answer is simply very straightforward it’s for your maximum hygiene and health improvement. Unlike the use of a traditional toilet where you need toilet paper to clean and dry your private parts, having this modern device installed in your bathroom gives you assurance that your private parts are thoroughly cleanse with its adjustable high pressured water, leaving you feeling clean and fresh where you needed it most.

Question #2 – Is bidet only for women?

One of the misconception about the use of bidet is it’s only for women. Most bidets come with two cleaning nozzles that are intended to clean the intimate parts of both men and women. The first cleaning nozzle is used for cleaning the bottom while the second nozzle is solely for women’s private part, ideal for usage during their monthly menstrual period.

Question #3 – Is using bidet safe?

The design and built-in features of this toilet model is recognised safe for general use of the entire household. In fact, it’s even recommended for elderly people, those with disabilities and suffering from constipation or hemorrhoids. Besides, upgrading your traditional toilet to a high-end bidet gives you assurance that cleanliness is achieved at its highest level.

Question #4 – Does a bidet consume too much water?

Bidets consume approximately 500ml of water per use which is equivalent to two (2) glasses. This water consumed is lesser if you will compare it to the actual amount of water wasted while washing your hands or showering. When you wash your hands the average water consumed is two (2) liters while a normal 10 minute shower will use 120 liters of water.

Question #5 – Where to purchase a bidet?

Bidet is just one of the high-end bathroom collections that have conquered modern homes. If you have finally decided to purchase this type of toilet, why not check aunstralianbidet.com a reliable supplier of top quality bidets, electronic bidet seats and famous Toto toilets.

Question #6 – Is a bidet expensive?

There are a variety of bidets sold in the marketplace that suit every homeowner’s budget. If you don’t know what type of bidet will suit you best, talk to a customer representative of australianbidet.com and get assistance in choosing the right model.

All You Need To Know About Festool Power Tools

The reason why Festool power tools are so popular despite being more expensive than many other brands is the unparalleled quality of results they deliver every time. This helps you work more efficiently and save time and money on every job. Moreover, festool machines are designed to optimally use the material by avoiding wastage.

Backed by extensive warranties, festool products are designed to withstanding heavy duty usage in most industrial environments. No doubt, festool tools work exceptionally well every single time and they can last a very long time without any major maintenance requirements, but the best thing about these tools is that they work seamlessly with each other- making them the most efficient system available anywhere.

Let’s delve into the basics of festool power tools and discover how advanced tools and building supplies can help you make a big difference to your bottom-line.

What is Festool?

Festool is brand specializing in manufacturing a range of ergonomically designed power tools to accomplish a number of jobs in a variety of industries. These tools include but are not limited to sanders & polishers, cordless drills, jigsaws, planers, routers, track saws and dust extractors, among others.

There’s no task that a Festool machine cannot accomplish. For instance whether you want to remove hideous nail holes from your wooden floor or you want to remove previous finish before painting your cabinets, festool power sanders never fail to deliver highest quality results time and again.

How to Use Festool Power Sanders?

Festive power tools are wonderful machines that can make any difficult industrial task easier, more accurate and enjoyable. When it comes to sanding floorboards, it is best to sand them in the direction of wood grain. This will prevent scratches and allow sander to move smoothly and without any breaks.

If you want to smooth edges of several flat boards, just clamp them together and use your festool sander on all of them simultaneously. Belt sanders are great for this purpose.

If you’re looking for lightweight options, go for orbital sanders. This is the best power sander for beginners as with this sander there’s virtually no risk of damaging the surface. However, it can be only used for light tasks such as smoothening wood, removal of dried paint and varnish, and to round off the sharp edges.

For more information on festool power tools, and to choose from the widest range of building supplies in Australia, visit Network Building Supplies today!

Monitored vs. Non-monitored Domestic Security Systems

Homeowners nowadays have a lot of options to choose from when it comes to domestic security systems. For instance, they can choose between monitored or non-monitored security systems and house alarms. Each of these have their own unique features, as well as their own pros and cons.

Monitored Domestic Security Systems

Monitored house alarms are those that are linked to a central monitoring response office. The alarm companies will charge a monthly fee for the monitoring service. This is on top of the installation fee which they will charge up front. The monthly fees for the monitoring service will vary depending on the plan or package you choose. Any additional features, services, and the length of the contract may also impact the monitoring costs.

With monitored house alarms, the monitoring company will receive an intruder alert or signal when the system is triggered. The company will then send you a notification through your smart phone or telephone. This usually takes about ten seconds or so.

Once you receive the call, the monitoring company will then ask you several questions to verify your identity. This includes your name, the domestic security systems passcode, and several other details as they seem necessary. If the monitoring company isn’t satisfied with your answers, they’ll send the police over to your house.

Non-monitored Domestic Security Systems

Non-monitored domestic security systems are simply linked to alarm that is installed in the house. Because of the absence of a monitoring service, it is a cheaper option versus monitored house alarms. This works by sounding an alarm or siren or flashes your home’s lights when the system is tripped or triggered. In addition, the system also automatically dials the police office to alert them of the possible break-in.

Despite the money-saving feature, there are some things that you need to be aware of regarding non-monitored domestic security systems. For instance, there are places where false alarms are charged a penalty. Also, the response time of the police is not guaranteed especially if they’re located rather far from your home. Lastly, you may not even be able to count on your neighbours for help even if your sirens are blaring.

As mentioned, both monitored and non-monitored house alarms come with their own advantages and disadvantages. It is up to you to weigh which of them would best suit your wants and needs. Whichever type you choose, just be sure that you are getting high quality domestic security systems. Be sure that they are installed by professionals as well. These will give you the peace of mind that your house alarms will work when it matters the most.

Natural Stone Can Offer a Smooth Look In a Bathroom

You have to look at how well a stone surface can be applied as you plan on getting a great flooring surface or other spot produced in your bathroom. A natural stone surface can be used anywhere to produce a unique appearance that offers a ceramic-like look.

One interesting thing you might notice in a stone surface is that it offers a look that can vary based on your application. You can opt for a more consistent look with one colour featured on your stone surface. You also have the option to find something with a few natural stress marks on the surface with some swirl-like effects.

A stone material can come with a fine shine all around as well. A sealant could be added onto the surface to create the ceramic look that makes such a spot a little more luxurious and relaxed in its feel.

You can get a hard surface like this added anywhere in your bathroom. You can always get it applied onto your floor to create a smooth look or you could get it added onto a countertop. A vanity or sink could feature a nice marble tone, for instance. A marble bathroom can come with a strong sink that has a bright look.

Even the walls around your bathroom can utilize stone materials. This works best when you get a solid surface applied. While a tiled surface could be utilized, it is best to make the walls solid so they are easier to clean off. This does not mean that tiles cannot work although the grout you use for those tiles should be checked well so it matches up perfectly.

Look at how well stone can be used in your bathroom and see how outstanding it can look. The versatility of this surface and its many appearance features deserve to be noticed. Check with us for additional information on how well a great stone surface can be applied in your bathroom.

Seven Things to Consider When Finding Furniture For the Elderly

Older people in Sydney are often at risk of harm from many things including the pieces of furniture in their home. There are seven things that should be thought about when getting furniture ready for any spot that the elderly might be in.

Look at how accessible furniture for the elderly can be. A piece of furniture needs to be easy for a person to get in and out of.
See that the legs on the furniture can stay in place. It is easier for people to get in and out of furniture when it is stuck in place and will not shift while one tries to get onto it.
See how well the cushions on your aged care furniture Sydney are designed. The cushions should be comfortable without being too firm or soft. They need to support a person’s natural shape quite well.
The furniture needs to be light in weight. It should not be difficult reposition the furniture if necessary.
Any piece of furniture with castors on the bottom needs braking features. These include brakes that stop the furniture from rolling backward.
Do not buy anything with confusing or complicated patterns on their bodies. Such complex patterns might be difficult for some elderly people to comprehend. This is especially the case for those with dementia or other degenerative disorders where it becomes harder for them to notice what makes certain surfaces distinct.
Consider the layout of the room that the furniture will be placed in. The furniture should be organized in spots that are easy for a person to reach. It must be designed to fit well into many surfaces without being tough to handle.

Be certain you look at how well the furniture you order for elderly people is arranged and that you order options that are suitable for use in a room. Ask us for additional information if needed.

Inflatable Boats in Australia: DIY or Professional Repairs?

In general, inflatable boats in Australia like Highfield boats and others are subjected to harsh conditions out in the waters. Chemicals and minerals in the water, the sun’s ultraviolet rays—all these can cause significant damage to any inflatable boat. As such, repairs will be necessary at some point in your inflatable boat’s lifespan. This is true even if you practice regular cleaning and maintenance.

This then begs the question, should you do the repairs yourself or let a pro take care of it? There are people who say that most repairs can be done by yourself. However, there are certain things that you’ll want to consider if you want to go this route.

Type of Material. Inflatable boats in Australia are made from different materials like hypalon or PVC. Before initiating any repair, be sure to know what material your inflatable boat is made of. Different materials will have different requirements where repair is concerned. For instance, the glue needed for each fabric is different, and it is important to use the correct one or else the patch won’t stick.
Patching a tear seems like a straightforward process—until it isn’t. For example, a tear smaller than two inches may not require an inside patch. Anything longer though will certainly require one. An inside patch is necessary as it gives added strength to the repair. In addition, the patch should extend at least 50mm on all sides of the tear.
Temperature and Humidity. Most types of repairs regarding inflatable boats in Australia are best done in a controlled environment. Manufacturers’ will have varying recommendations as to the right temperature and humidity levels. For instance, some will recommend a temperature around 20 degrees C and a humidity level of 40%. It is necessary to follow these since this will have an effect on the bond strength of the adhesive.

In most cases, you can do the repairs on your own. However, it isn’t always as easy as it would first appear to be. Also, there are many things to consider when it comes to repairing damaged inflatable boats in Australia. From the type of repair kit to the environment conditions—all these are often out of the grasp of the regular boating enthusiast. And these are just some of the considerations—there’s simply a lot more to know.

Thus, it is sometimes best to leave the task to a reputable and skilled repair technician. Here at Lejen Marine, we are more than capable of repairing and retrofitting replacement accessories on any inflatable boats in Australia. Just give us a call at (02) 9979 4533 or at 02) 9979 4533 or send us an email.

Laser Tag In the Park Is a Safe Activity To Enjoy

It is easy for people to be harmed while playing games at a party in a Chatswood park. The problem with some games is that they entail lots of physical contact that might be dangerous. These issues can especially be prominent in a park space where the area for playing around is wide open.

Fortunately, laser tag Chatswood activities are safer and much more enjoyable to get into. But some points should be used when making these activities safer.

What Makes It Safe?

Laser tag in the park is safe for many reasons:

The laser materials used inside the laser guns do not emit harmful radiation. They emit signals similar to what is used in traditional RC toys.
The lights produced by laser guns are invisible and will not blind anyone.
There is no need for people to physically contact each other while playing.
It also works without any projectiles or other flying items. The only bits of equipment needed are either stationary around your park space or things that people will hold onto while playing.

A Few Pointers

Some additional considerations should be used when getting a laser tag activity ready:

Any park space that could be used should be reviewed carefully. It should be easy to play on without having rough or slippery surfaces. All steps and steep surfaces should be avoided.
All people who participate should wear shoes that can handle the playing surface. They must wear comfortable shoes that will not be at risk of slipping around.
Watch for the weather in a spot. Do not play when it is raining or lightning is in the area.
A proper first aid kit should be brought to any play event just to be safe.

Be certain that you watch for how a laser tag activity is organized. You will love getting one of these events set up in any park space. Contact us to learn more about how such a great party can be prepared.

Glass Replacement Specialist Guide: How To Replace A Broken Window Glass?

Are you worried that the visible cracks on your window will eventually lead to sudden breakage? A broken window glass poses danger and if no glass replacement has been done immediately it could cause serious injury. So, how to replace a broken glass window? Here is a guide from a window glass replacement specialist.

Replace broken glass with the professional services of a window glass specialist

Glass replacement for broken windows is now within easy reach by just making a call from a window specialist and booking for a home visit. The following procedures will be performed the moment the window specialist arrived at your place:

Carefully evaluate the extent of damage on the window. If the cracks are large enough to cause breakage anytime, the window specialist will recommend immediate replacement and schedule the soonest possible time to do the actual repair.
Your window glass specialist will notify you when their team will do the scheduled repairs because they still need to get the accurate measurement of the broken glass.
When the assigned team will arrive to replace the broken glass, expect them to wear protective clothing. They will also place protection covering on the area where the broken window is located to prevent tiny pieces of glasses from scattering on the floor as they perform the glass replacement.
Once the new glass is fitted, the team will do the clearing, cleaning and final touches to ensure the replaced glass window fits nicely. They will also provide tips on cleaning your new glass window.

Replace broken glass on your own

Although, it’s not advisable to replace a broken glass window without an expert, if you would like to do it on your own, observe the following safety measures.

Before you make any attempt to pull the broken glass, wear protective clothing and hand gloves. Don’t forget to place on the floor any cloth to protect the floor and your furniture from coming in direct contact with the broken glass.
If the entire glass of the window is already shattered, removing the remaining pieces isn’t complicated. However, if the glass has only cracks, this task can be a bit challenging. You will need to scrape the putty or heat the glazing compound in order to loosen the broken glass.
Once the window is cleared from broken glass fragments, it’s now ready for re-glazing. Get the accurate measurement of the area that requires glazing.
Order the glass replacement. It may take days before the new glass will be delivered, so make sure the window is secured. You can put a temporary board to cover it.
In the event the window pane is also broken, but you can’t get the exact width, remove the window frame and have it measured by your local window specialist.
When the ordered new glass and window pane arrives you can now proceed with the installation. Check if the new glass has the right size. If it perfectly fits, install it using a glazier tool and putty.

If you aren’t confident that you can do this glass replacement successfully on your own, contact a certified window glass provider and let their team do this tricky job. Don’t delay replacing a broken glass window because it will only put you and your loved ones to greater risk, but also exposes your home to other problems such as unsecured home and higher electricity bills.

For free quotation on the cost of window repair and replacement or cut to size mirrors for your bathroom, visit Graphic Glass Melbourne.

Why Choose The Modern Design Toto Toilet Bidet?

Are you planning to upgrade your bathroom? You should consider the next generation toilet that most modern homes have, the Toto toilet bidet. Do you want to know the reasons why homeowners prefer the modern designed bathroom essentials like bidet toilet? Well, I won’t keep you waiting because below are the vital reasons that will lead you to the right conclusion, investing on a modern toilet is a must.

Reason #1 – Eco-friendly

This is one of the reasons why many Australian household families, particularly those on the stage of building or renovating their homes choose the Toto toilet bidet instead of the traditional type toilet, it’s very eco-friendly. A modern designed bidet lessens the consumption of toilet paper which in a way is good for the environment. Imagine how much waste we can save if the need for toilet paper is reduced.

Reason #2 – Cost-effective

As mentioned the use of bidet toilets eliminate the need for toilet paper. Again, compute the money that will be saved on your weekly grocery if you have the option to completely eliminate the usage of toilet paper. You can use that extra money in other household needs.

Reason #3 – Offers a variety of designs

Modern toilets come in various designs, material made and pricing. If you are tired of the usual ordinary toilet that you were used to since you are a kid, time to level up now with a bidet toilet that matches your personal needs and budget. Bidet toilets come in portable units, electronic or non-electronic. Whatever your preferences, there is a particular Toto toilet bidet for you.

Reason #4 – Versatile device

Yes, this is among the reasons why many homeowners can’t resist the newest bidet toilet because of its versatile usage. Apart from ensuring you achieve maximum hygiene after using the bidet like thorough cleaning of your private part, this device has also medical purposes. Medical professionals like doctors highly recommend to their patients suffering from medical problems like constipation, itchiness, hemorrhoids, upset tummy and urinary tract infection the advantage of using a bidet toilet. Bidet toilets are specifically designed to make cleaning of your private parts easy and more comfy. In fact, elderly people and pregnant women in the later stage of pregnancy will find a bidet toilet convenient to use than the ordinary toilet.

With the many reasons shared on the preferences of modern bidet toilet, this is a perfect timing to give it a careful analysis. If you want your loved ones to live a healthier life, invest on a bidet toilet that will not only suit your budget, bathroom’s interior design, but also guarantee maximum hygiene is met. If you current home décor theme is Japanese inspired, the Japanese toilet seat can be installed on your bidet. Contact now Mizudori for their modern bathroom collections.

Should You Choose Offset or Digital Printing for Banner Stands and Other Display Materials?

Generally, there are two main methods employed by printers when it comes to printing banner stands and other display materials. Some shops offer offset printing while others offer digital printing. Many shops though are capable of offering both services. But which of these two printing methods should you opt for? To know the answer, it is best to take a close look at both types of printing methods.

The traditional offset printing method does have its advantages. For instance, it does a great job when it comes to colour matching with the addition of special inks. These results to precise colour matching for corporate logos that require dramatic effects (like metallic hues for instance). This is one reason why many businesses choose offset printing for their banner and pull up stands.

However, it should be noted that this can be quite expensive as well. This is because offset printing is labour-intensive. There are plates to be prepared, the application of the finish, and the drying time. It also takes longer to complete given all the processes involved. It typically takes about two weeks or more to print banner stands and other display materials.

On the other hand, digital printing takes a shorter time to complete and is a more affordable option. Once the design is checked for quality and is ready, it is sent to the printer for printing. Usually, it takes about two to three days to complete a whole project or printouts. Thus, if you are in a rush and need your pull up stands right away, digital printing is worth considering. Because of this rather straight-forward process, digital printing doesn’t cost as much as offset printing does.

So between offset printing and digital printing, which is the better option? The answer would actually depend largely on your own personal or business requirements.

For instance, if you’re banner stands require the use of special inks, substrates and finishes, then choose offset printing. It gives you great colours and finish and has this high quality and luxurious look. Digital printing can produce great looking printouts as well for banner and pull up stands. However, they won’t stand out against those printed with offset printing. If you are short on budget and time, digital printing is the best option to go for. For the price, the quality of the printout is still worth it.

Whatever you choose, you need to make sure that you hire only reputable printers for the job. This will ensure that no matter what printing method is used, you’ll still get great–looking and wonderfully crafted banner stands, pull up stands or other display materials.

Month: December 2017